More in SERVO Magazine
Reviving an Androbot BOB | Part 2
Last month, you read about how I started re-using some leftover robotics components to revive an old Androbot BOB robot chassis. I focused on what was needed to control the drive motors in the BOB base. I also covered upgrades to an old Handy Board controller to make it more suitable for use on a larger robot and enhancements to the board to make it more reliable. Since the only thing I had to start with was the empty robot shell and drive motors, this entire project is covering the rest of ...
SERVO Magazine (March 2008)
By
Robert Doerr
Article Comments
Use this area to comment on the article. To discuss the article with others, please visit our Forums. If you have questions regarding this article, please e-mail the Editor.
You must be logged in to post a comment.