Servo Magazine ( March 2016 )

Your Robot Problems Solved Here (03.2016)

By Dennis Clark    View In Digital Edition  

Mr Roboto is asked to design a circuit to use with an Arduino Uno and ITEAD joystick shield whereby the shield can stand alone and the joystick be wired to act as an on/off switch, but also to use the same setup with a sketch to do the same thing (act as a switch). With that in mind, an LED driver circuit and a sketch able to interpret the analog joystick values from an ITEAD joystick shield is what he creates.


Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.

If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!

If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.

Article Comments