Servo Magazine (September 2008)

Getting Control With the Propeller | Part 1

By Chris Savage    View In Digital Edition  


Recently, an artist friend asked me how he might go about automating his latest masterpiece using a BASIC Stamp®. After looking at what he had, it turns out he was going to need to control DC motors, hobby servos, and stepper motors. While there are solutions for controlling all of these devices it would generally mean having three separate controllers (one for each device). A better solution would be ...

:::

Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.

If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!

If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.

Downloads

09.2008 | Express PCB file and schematics



Article Comments