Servo Magazine ( May 2008 )
Designing and Building a Robot from Scratch | Part 3
By Brian Benson View In Digital Edition
Next, we chose a frame type and the components along with determining the ideal layout. We completed the design of the robot (shown in Figure 1) and now we are ready to discuss final preparation before the actual construction phase!
:::
Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.
Article Comments