Servo Magazine (December 2008)
Build The Ultimate Robot: Part 3 | Nase Assembly
This month, I will show you how to build the main base assembly for our two characters. Keep in mind that the dimensions and hole sizes given are based on the RS-64 actuator used on the Megabot and the RS-28 used on the Firebot. You are free to change these actuators, but some of the dimensions and hole locations may need to be changed accordingly. In this series of articles, the final robot is not as important as the journey that we take to get there. Many of you won’t build the exact robots...
Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue icon in the upper right corner. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue icon let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.