Servo Magazine ( March 2010 )
Pattern Routing of Plastic Parts
By Pete Smith View In Digital Edition
The easy way to do these parts is to have them watercut by a company like Team Whyachi ([url=http://www.teamwhyachi.com]http://www.teamwhyachi.com[/url]), but if you need parts quickly and your time is cheap, then with a little careful design you can route the same parts using just a router and a pattern.
Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.