Servo Magazine ( February 2008 )
NXT Packbot | Part 3
By James Isom View In Digital Edition
Let’s pick up where we left off in December and finish up the main chassis of the Packbot. Rear Chassis Assembly: The two sides are mirror images of one another that come together with a middle bracket that will eventually help organize the wires for your motors and sensors. Once again, I’ll include instructions for both sides to make it easier...
Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.