Servo Magazine ( October 2008 )
Getting Control With the Propeller | Part 2 | Controller Servos
By David Carrier View In Digital Edition
When designing a product that will sell millions of units, every cent counts, so engineers will often use very creative methods to program a single microcontroller to handle multiple tasks. These tricks can be difficult to comprehend, let alone implement. For one-time projects — especially for hobbyists — programming a second inexpensive microcontroller to perform the task achieves the same results but requires significantly less time. To simplify programming even more, many manufacturers sell..
:::
Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.
Article Comments