Servo Magazine ( July 2008 )

Encoder Matching | Scaling And Inverting Encoder Values

By Robert Doerr    View In Digital Edition  

One of the joys of the robotics hobby is mastering the art of interfacing. A lot of the parts are already in front of us and we just need to make them work together. Recently, I ran into a problem with a pair of quadrature encoders for the drive train on one of my robots. The encoders themselves worked fine and were generating perfect quadrature outputs. However, they were sending out data faster than the controller could handle at higher speeds. As a result, the encoder readings were ...


Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.

If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!

If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.


07.2008 | Processor to scale encorder values

Article Comments