Build Simone the AI Fembot Part 8: Bringing Simone to Life!

Build Simone the AI Fembot Part 8: Bringing Simone to Life!

By Thomas Messerschmidt    View In Digital Edition  

We’ll assemble and connect her power distribution board, then connect her EZ-Robot board which will be acting as her cerebellum/brain stem. We’ll install and configure her ARC software onto your PC. We’ll then test and adjust every servomotor to ensure that each is configured to run correctly. Next, we’ll connect her camera and test the software. Finally, we’ll put Simone into her Puppet Mode” and move her around as we choose, and have her say whatever we want.


Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.

If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!

If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.

Article Comments