Servo Magazine ( March 2018 )

A Fan Controller for a 3D Printer Enclosure

By Theron Wierenga    View In Digital Edition  

I had been working on a 3D printed custom enclosure for the underwater Quad_ROV recently covered in SERVO (December 2017 and January 2018 issues). After some difficulties with ABS plastic, I decided to enclose the printer. Temperature control was necessary, so here’s what I did.


Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.

If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!

If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.


What’s in the zip?


Article Comments