Servo Magazine ( July 2016 )

Build Your Own Drone: Getting Started — Part 3 - Electronics and Flight Controller

By John Leeman    View In Digital Edition  

Last time, we built an airframe as the skeleton of our drone. In this next part, it's time to add the muscles and brains. We're going to install the power system, motors, motor speed controllers, and radio equipment. With all of the hardware installed, our drone is about to come alive. We are also tantalizingly close to a test flight!


Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.

If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!

If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.

Article Comments