Servo Magazine ( January 2017 )

Building the KReduCNC Clamp Table

By Michael Simpson    View In Digital Edition  

In this session, we are going to install the clamp table. The clamp table is the surface you use to attach your stock. In addition to the table, we will be mounting the KReduCNC electronics inside the frame. We will also be doing some cable management in order to get our machine ready for action.


Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.

If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!

If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.

Article Comments