Servo Magazine ( February 2017 )
Building the KReduCNC Spindle Hookup
By Michael Simpson View In Digital Edition
It has been a while since we started this project, and it’s time to make some chips. In this installment, we’ll go over spindle hookup. A spindle is the rotation portion of a CNC machine on to which a cutting tool is attached. While technically the spindle is the shaft itself, it has become common place to refer to the motor and shaft assembly as the spindle.
:::
Read This Article!
If you’re a subscriber and your subscription includes this issue of SERVO, you can read this article in our digital edition by clicking the blue "View In Digital Edition" button above.. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue button let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.
Article Comments