M068402b8978cf01c28fa5e7a66b282e74

Researchers Hope to Mass-Produce Robots on a Chip

Tiny robots the size of a flea could one day be mass-produced, churned out in swarms and programmed for a variety of applications, such as surveillance, micromanufacturing, medicine, cleaning, and more. In an effort to reach this goal, a recent study has demonstrated the initial tests for fabricating microrobots on a large scale.


An illustration of the I-SWARM robot: (1) solar cell, (2) IR-communication module, (3) an ASIC, (4) capacitors, (5) locomotion module. Image credit: Edqvist, et al.


The researchers, from institutes in Sweden, Spain, Germany, Italy, and Switzerland, explain that their building approach marks a new paradigm of robot development in microrobotics. The technique involves integrating an entire robot - with communication, locomotion, energy storage, and electronics - in different modules on a single circuit board. In the past, the single-chip robot concept has presented significant limitations in design and manufacturing. However, instead of using solder to mount electrical components on a printed circuit board as in the conventional method, the researchers use conductive adhesive to attach the components to a double-sided flexible printed circuit board using surface mount technology. The circuit board is then folded to create a three-dimensional robot.





[Source] Physorg

 


Posted by .(JavaScript must be enabled to view this email address) on 08/28 at 11:08 AM


Comments



<< Back to blog