More in SERVO Magazine
Computer Control and Data Acquisition: Part 3
From the previous two articles, you learned how to output and input digital signals using National Instruments LabVIEW software and their USB-6008(9) hardware. However, the signals have only been in the TTL range of voltages (0V and +5V) and with fairly low current levels, 8.5 mA maximum per digital terminal. In the real world outside of the PC and the USB-6008(9) units, voltage and current levels are typically much higher and also include AC signals. This article will demonstrate some of ...
SERVO Magazine (May 2009)
By
David A. Ward
Article Comments
Use this area to comment on the article. To discuss the article with others, please visit our Forums. If you have questions regarding this article, please e-mail the Editor.
You must be logged in to post a comment.