Media Downloads
Program files available here for download have been provided to us by outside sources. Many of these files are also available elsewhere, but are provided at this location for the convenience of our readers, due to their mention or review in SERVO Magazine. Any cost, restrictions, license agreement, support, documentation, etc. is between the user and the originator of the software. SERVO Magazine does not warrant any of these files to be suitable for any specific use. We believe them all to have been released into the public domain. Therefore, their presence here and availability for download does not constitute any copyright infringement or licensing violation. If you believe otherwise about ANY of these files, please let us know so we can remove it or obtain permission to distribute it here.
Use PKUNZIP or WINZIP to decompress. We do NOT test, support, modify, or troubleshoot code. Please notify us by Email at publisher@servomagazine.com if you find any that does not work. If you need a specific code listing from a past article that is not listed, contact us by Email and we will try to accommodate your request, if possible.
April 2006
|
 |
|
LessonsFromTheLab-0406.pdf (240.48 KB)
Lessons From The Lab (column) - James Isom
entire article |
 |
|
Servo_Controller.HEX (1012 B)
R/C Servo Controller (project) - Rob Caruso
HEX File for the Servo Controller. |
 |
|
StampApril05.pdf (6.29 MB)
Robotics Resources (column) - Gordon McComb
PDF of April 2005 Nuts & Volts Magazine column "STAMP Applications". |
 |
|
source code.zip (97.45 KB)
Rubberbands and Bailing Wire (column) - Jack Buffington
Copy of the Source Code for the Keyboard and figure 3. |
 |
|
Code.doc (48.5 KB)
The Ultimate TABLEBot (project) - Camp Peavy, Jr.
BS2 Code for the Protobot |
 |
|
PeavyOct05.pdf (26.19 MB)
The Ultimate TABLEBot (project) - Camp Peavy, Jr.
PDF of the October 2005 project "ProtoBot" by Camp Peavy, Jr. |
|